|
|
| |
|
|
|
|
|
|
 Click to enlarge image
|
 Model Number |
EGX-30 Desktop Engraver |
- MODEL : EGX-30 Desktop Engraver
- TABLE SIZE : 12 in. x 8-1/16 in. (305 mm (X) x 205 mm (Y))
- MAX. OPERATION AREA : 12 in. x 8-1/16 in. (305 mm (X) x 205 mm (Y) )
- FEED RATE : 118-1/16 in. (X, Y-axis: Max. 3.0 m)/min. (1-15/16 in. (50 mm)/sec.)
- MECHANICAL RESOLUTION : 0.000394 in. (0.01 mm)/step 0.0000492 in.(0.00125 mm)/
Step (micro-step control )
- SOFTWARE RESOLUTION : 0.000394 in. (0.01 mm)/step
- DISTANCE ACCURACY : Whichever the greater value of 0.00394 in. (0.1 mm) or 0.5% of moving distance
- RIGHT-ANGLE ACCURACY : 12-1/16 in.( 0.0394 in.) (1 mm (305 mm))
- SPINDLE MOTOR : 15 W ( DC motor )
- REVOLUTION SPEED : 5,000 --- 10,000 rpm
- ENGRAVING TOOL MOUNTING DIAMETER : 3.175 mm (1/8 in.)
- INTERFACE : Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard) Automatic switching
- INSTRUCTION SYSTEM : CAMM-GL II mode2
- POWER CONSUMPTION : 0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230 to 240 V
- ACOUSTIC NOISE LEVEL : Operation mode: 70 dB (A) or less Standby mode: 40 dB (A) or less
(According to ISO 7779)
- EXTERNAL DIMENSIONS : 20-1/4 in.(W) x 19-3/8 in.(D) x 8-9/16 in. (H)(513 mm (W) x 491 mm (D) x 217 mm (H)
- WEIGHT : 15.5 kg (34.2 lb.)
- OPERATION TEMPERATURE : 5 to 40 C (41 to 104 F)
- OPERATION HUMIDITY : 35 to 75% ( no condensation )
- ACCESSORIES : Power cord: 1, Dust collector hose and duct: 1, Engraving cutter: 1, Engraving-tool holder: 1, Diamond cutter adapter: 1,Hexagonal screw driver: 1, Spanner: 1, Hexagonal wrench: 1, Test material: 1, Adhesive sheet for securing material: 1,Roland Software package CD-ROM: 1, User's manual: 1
|
|
|
|
| |
|
|
|
Related Keywords:
Bookmark / Share this page